Publications

"Chapter 4: Structural Analysis". ICE Manual of Bridge Engineering, Third Edition

- NE Shanmugam, Mahendrakumar Madhavan

"Chapter 2: Recent development of building codes and design standards for cold-formed steel structures". Recent Trends in Cold-formed Steel Construction (Elsevier), Volume 1

- H. Chen, G. Hancock, Y. Li, Mahendrakumar Madhavan, Sivaganesh Selvaraj and C. Yu.

"Chapter 14: Direct stiffness-strength method design for cold-formed steel structural members with sheathing bracing". Analysis and Design of Plated Structures (Elsevier)

- Mahendrakumar Madhavan and Sivaganesh Selvaraj.

"Experimental investigation of interactive buckling behaviour in cold-formed steel built-up open columns"

- Bishal Naik, Mahendrakumar Mathialagu Madhavan, Aayush Dua and Shwetabh Yadav

Journal of Structural Engineering (ASCE)

"Behaviour of cold-formed steel beam-to-column clip-angle connection at fire"

- Ranjithkumar Palaniyammal Madheswaran, and Mahendrakumar Mathialagu Madhavan

Journal of Structural Engineering (ASCE)

"Structural Strengthening of Steel Channel columns using Low-modulus CFRP fabrics"

- Sivaganesh Kanmani Selvaraj and Mahendrakumar Mathialagu Madhavan

Thin-Walled Structures

"Behaviour of Plywood-Sheathed Cold-Formed Steel Shear Walls under In-Plane Shear Loading"

- Karmugilan Selvakumari Panchamoorthy and Mahendrakumar Mathialagu Madhavan

Journal of Constructional and Steel Research

“A Study on Residual Stress Distribution in Cold-Formed Steel Press-Braked Channel Section”

- Alok Kumar Panditaray, Mahendrakumar Mathialagu Madhavan, and Gopinath Muvvala

Engineering Structures

“Influence of Web Buckling on Flexural Performance of Bolted CFS Apex Sleeve Connector Between Single-Channel Rafters”

- Naveen S, Hareesh Sirigiri and Mahendrakumar Mathialagu Madhavan

Journal of Structural Engineering (ASCE)

"Improved design method for beam-to-beam bolted moment connection of CFS connector"

- Ranjithkumar Palaniyammal Madheswaran, Nagaraju Mallepogu and Mahendrakumar Mathialagu Madhavan

Structures

"Strength and Stiffness criterion-based classification of the cold-formed steel welded beam-to-column connections"

- Nagaraju Mallepogu and Mahendrakumar Mathialagu Madhavan

Journal of Constructional Steel Research

“Cleat angle behaviour in C-shaped purlin-to-rafter connections: Experimental study and design considerations”

- Chandragiri Hari Narayana, Anusha Naik, Bishal Naik, and Mahendrakumar Mathialagu Madhavan

Journal of Structural Engineering (ASCE)

“An Investigation on Residual Stress Distribution in Cold formed Steel Channel Section”

- Alok Panditaray, Bishal Naik, Mahendrakumar Mathialagu Madhavan, and Gopinath Muvvala

Journal of Structural Engineering (ASCE)

"Behaviour of thin steel sheets single shear bolted connections at elevated temperature”

- Ranjithkumar Palaniyammal Madheswaran, and Mahendrakumar Mathialagu Madhavan

Journal of Constructional Steel Research

"Edge and end distance effects of thin steel sheets bolted connection at elevated temperatures”

- Ranjithkumar Palaniyammal Madheswaran, and Mahendrakumar Mathialagu Madhavan

Structures

"Experimental investigation and design of a cold-formed steel 2-bolt moment connection comprising a 2-bolted clip-angle and flange-cleat"

- Nagaraju Mallepogu and Mahendrakumar Mathialagu Madhavan

Structures

"Comparative experimental study on pull-through behaviour of cold-formed steel c-shaped and z-shaped purlin-to-rafter connections."

- Haripriya Karthikeyan, Bishal Naik, and Mahendrakumar Mathialagu Madhavan

Thin-Walled Structures

"Development of a new classification system for the cold-formed steel bolted clip-angle beam-to-column connections"

- Nagaraju Mallepogu and Mahendrakumar Mathialagu Madhavan

Thin-Walled Structures

"A unified design model to assess the shear behaviour and ultimate strength of a cold-formed steel welded and bolted clip-angle connection"

- Nagaraju Mallepogu and Mahendrakumar Mathialagu Madhavan

Journal of Constructional Steel Research

“Experimental Study on Bolted Apex Connector for Single-Channel CFS Portal Frames”

- Hareesh Sirigiri and Mahendrakumar Mathialagu Madhavan

Journal of Structural Engineering (ASCE)

“Hat-shaped purlin-to-rafter screw connections: Pull-Through behaviour and design implications”

- Bishal Naik, Anusha Naik, Prajwal Simkhada and Mahendrakumar Mathialagu Madhavan

Journal of Structural Engineering (ASCE)

"Application of Low Modulus CFRP Fabric for Steel Beams Strengthening: Experimental and Design Validation"

- Sivaganesh Kanmani Selvaraj and Mahendrakumar Mathialagu Madhavan

Thin-Walled Structures

"Experimental Study of Screw Connections in Plywood-Sheathed CFS Wall Panels Subjected to In-Plane Shear Loading"

- Karmugilan Panchamoorthy and Mahendrakumar Mathialagu Madhavan

Journal of Structural Engineering (ASCE)

"A generic design approach for the ultimate shear strength of the CFS welded moment beam-to-beam connection”

- Ranjithkumar Madheswaran, Nagaraju Mallepogu and Mahendrakumar Mathialagu Madhavan

Journal of Structural Engineering (ASCE)

"New design shear method for bolted CFS connector in CFS beam-to-column connection”

- Ranjithkumar Madheswaran, Nagaraju Mallepogu and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Numerical investigation of CFS sleeve Channel connections for combined bending and shear”

- Surya Chandan Bondapalli, Vijayakumar Natesan and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Comparative Experimental Studies On Stiffened And Unstiffened Flange Cold Formed Steel Welded Sections Using Cold Metal Transfer Welding”

- Bishal Naik and Mahendrakumar Madhavan

Structures

"Design of Cold-Formed Z-Shaped Purlin-to-Rafter Connections Subject to Pull-Through Failure "

- Haripriya Karthikeyan, Bishal Naik and Mahendrakumar Madhavan

Thin-Walled Structures

"Design of Cold Metal Transfer Flare V-Groove Welds on Cold-Formed Steel Hat Sections”

- Bishal Naik and Mahendrakumar Madhavan

Engineering Structures

"The ultimate shear capacity of CFS torsionally restrained beam-to-column moment connection with 3-bolted clip-angle and flange-cleat”

- Nagaraju Mallepogu and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Numerical Study on Retrofitting of Hot Rolled Steel Beams with Cold-Formed Steel Encased Channels-Design Concept using Machine Learning Method"

- Gaurav Chobe, Sivaganesh Selvaraj and Mahendrakumar Madhavan

Engineering Structures

"Direct Stiffness-Strength Method: An Alternative Design Approach to AISI for Sheathed Cold-Formed Steel Z‑Section Structural Members subjected to bending"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Structural Behaviour of Cold-Formed Steel Built-Up Closed Cross-Section Columns - Assessing the Influence of Parameters and Design Methods"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Engineering Structures

"Experimental Studies on Pull-Through Capacity of a C-shaped Purlin Section"

- Haripriya Karthikeyan, Bishal Naik and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Improved design shear method of the bolted cold-formed steel clip-angle for serviceability”

- Nagaraju Mallepogu and Mahendrakumar Madhavan

Thin-Walled Structures

"Structural Performance of Cold Metal Transfer Welding Technique on Cold-Formed Steel Flare V-Groove Welds”

- Bishal Naik and Mahendrakumar Madhavan

Thin-Walled Structures

"Shear capacity of the cold-formed steel beam to column welded moment connection using clip-angle and flange-cleat”

- Nagaraju Mallepogu and Mahendrakumar Madhavan

Thin-Walled Structures

"Improved design shear method for the bolted cold-formed steel clip-angle connector”

- Nagaraju Mallepogu and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Proposal to Improve AISI S100 DSM Design Standards for Cold-Formed Steel Built-Up Closed Cross-Section Columns Subjected to Local–Global Interaction Buckling”

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Splice Connections for Built-up Column Assemblies in Cold-Formed Steel Construction”

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Application of Direct Stiffness-Strength Method for Design of Gypsum and Plywood sheathed CFS wall panels Subjected to Bending”

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Thin-Walled Structures

"Experimental analysis of the cold-formed steel beam-to-column connection using the welded clip-angle”

- Nagaraju Mallepogu and Mahendrakumar Madhavan

Thin-Walled Structures

"Experimental Investigation and Design Considerations on Cold-Formed Steel Built-up I-section Columns Subjected to Interactive Buckling Modes”

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Thin-Walled Structures

"Design of Cold-Formed Steel Built-Up Closed Section Columns using Direct Strength Method”

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Thin-Walled Structures

"Effectiveness of CFS Web Cleat Bolted Connections between Beam‑to‑Column”

- Vijayakumar Natesan, Bharath Shanmugasundaram, Monish Sekar, and Mahendrakumar Madhavan

Structures

"Sheathing-Fastener Connection Strength-Based Design Method for Sheathed CFS Point-symmetric Wall Frame Studs"

- Sivaganesh Selvaraj, Mahendrakumar Madhavan, and Lau. H. H

Structures

"Direct Strength Approach for Local Buckling of Cold-formed Steel Built-up Beams with Slender Unstiffened Flange Elements”

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Practice Periodical on Structural Design and Construction (ASCE)

"Design of Cold-formed Steel Back-to-Back Connected Built-up Beams”

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Design of Cold-Formed Steel Built-Up Columns Subjected to Local-global Interactive Buckling using Direct Strength Method"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Thin-Walled Structures

"Direct Stiffness-Strength Method Design for Sheathed Cold-formed Steel Structural Members - Recommendations for the AISI S100"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Thin-Walled Structures

"Criteria for Selection of Sheathing Boards in Cold-formed Steel Wall panels subjected to Bending: Construction Applications and Performance-based evaluation"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Practice Periodical on Structural Design and Construction (ASCE)

"Effect of Staggered Bolted Connections on CFS Channel Sections”

- Bharath Shanmugasundaram, Vijayakumar Natesan and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Recommendations for Design of Sheathing Bracing Systems for Slender CFS Structural Members”

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Comparative Experimental Studies on the Web Cleat Bolted CFS Beam-to-Column Connection”

- Vijayakumar Natesan and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Experimental Study on Ultimate Strength of Bolted L Shaped Sleeve Joints”

- Vijayakumar Natesan and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Influence of sheathing‑fastener connection stiffnesses on the Design Strength of Cold‑formed Steel Wall Panels"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Structural behaviour and Design of Plywood Sheathed Cold-Formed Steel Wall Systems subjected to out-of-plane loading"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Retrofitting of Steel Beams using Low-modulus Carbon Fiber Reinforced Polymer Laminates"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Experimental and analytical study of lightweight floor system built-up with cold-formed profile steel sheet and hot-rolled steel plate (CFPSS-HRSP)"

- Senthilkumar Govindan and Mahendrakumar Madhavan

Structures

"Flexural Behaviour and Design of CFS Wall Panels Sheathed with Particle Cement Board"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Performance of CFS Beam-to-Beam Bolted Connection Using Clip Angle and Flange Strip: Experimental Investigation"

- Vijayakumar Natesan and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Behaviour of Gypsum Sheathed Point symmetric Cold formed Steel members: Assessment of AISI design method"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Structures

"Structural performance on bolted sleeved connections between two CFS channel sections subjected to combined bending and shear"

- Vijayakumar Natesan and Mahendrakumar Madhavan

Structures

"Study on cold-formed and hot rolled steel composite panel system"

- Senthilkumar Govindan and Mahendrakumar Madhavan

Structures

"Structural Design of Cold-formed Steel face-to-face Connected Built-up beams using Direct Strength Method"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Experimental study on beam-to-column clip angle bolted connection"

- Vijayakumar Natesan and Mahendrakumar Madhavan

Thin-Walled Structures

"Design of Steel Beams Strengthened with Low-modulus CFRP laminates"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Composites for Construction (ASCE)

"Sheathing Braced Design of Cold-formed Steel Structural Members Subjected to Torsional Buckling"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Structures

"Investigation on sheathing-fastener connection failures in cold-formed steel wall panels"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Structures

"Bracing Effect of Sheathing in Point symmetric Cold-formed Steel Flexural Members"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Constructional Steel Research

"Experimental investigation on clip angle bolted connection between two cold-formed steel channels"

- Vijayakumar Natesan and Mahendrakumar Madhavan

Structures and Buildings

"Sheathing bracing requirements for Cold-formed steel wall panels: Experimental Investigation"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Structures

"Strengthening of Laterally Restrained Steel Beams Subjected to Flexural loading using Low modulus CFRP: Experimental Assessment"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Performance of Constructed Facilities (ASCE)

"Investigation on Sheathing Effect and Failure Modes of Gypsum Sheathed Cold-formed Steel Wall Panels Subjected to Bending"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Structures

"Improvements in AISI Design Methods for Gypsum Sheathed Cold-formed Steel Wall Panels Subjected to Bending"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Retrofitting of Structural Steel Channel Sections using Cold-Formed Steel Encasing Channels"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Performance of Constructed Facilities (ASCE)

"Studies on Cold-formed steel stud panels with gypsum sheathing subjected to out-of-plane bending"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels using 3D Non-contact Laser Scanner"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Journal of Structural Engineering (ASCE)

"Strengthening of unsymmetrical open channel built-up beams using CFRP"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Thin-Walled Structures

"CFRP strengthened steel beams: Improvement in failure modes and analysis"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Structures

"Enhancing the structural performance of steel channel sections by CFRP strengthening"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan

Thin-Walled Structures

"Experimental Studies on Strength and Stiffness Enhancement in CFRP-Strengthened Structural Steel Channel Sections under Flexure"

- Sivaganesh Selvaraj and Mahendrakumar Madhavan and Dongre SU

Journal of Composites for Construction (ASCE)

"Notch Stress Intensity Factor for Center Cracked Plates with Crack Stop Hole Strengthened using CFRP: A Numerical Study"

- Reddy S, Vutkuru, J, Mahendrakumar Madhavan and Kumar V

Thin-Walled Structures

"Flexural Strengthening of Structural Steel Angle Sections Using CFRP: Experimental Investigation”

- Mahendrakumar Madhavan, Sanap V, Verma R and Sivaganesh Selvaraj

Journal of Composites for Construction (ASCE)

“Progressive failure analysis of CFRP laminate with interacting holes under compressive loading,”

- Khedkar S, Chintapenta V, Mahendrakumar Madhavan and Ramji M

Journal of Composite Materials

"Theoretical Evaluation of Flange Local Buckling for Horizontally Curved Girders”

- Mahendrakumar Madhavan, and Davidson JS

Journal of Bridge Engineering (ASCE)

"Elastic buckling of I-beam flanges subjected to a linearly varying stress distribution"

- Mahendrakumar Madhavan, and Davidson JS

Journal of Constructional Steel Research

"Buckling of centerline-stiffened plates subjected to uniaxial eccentric compression"

- Mahendrakumar Madhavan, and Davidson JS

Thin-Walled Structures

“Ultimate Load Behaviour of Horizontally Curved Plate Girders,”

- Shanmugam NE., Mahendrakumar Madhavan, and Thevendran V.

Journal of Constructional Steel Research

"Experimental investigation on bolted apex connector for single-channel CFS portal frames"

Proceedings of the 12th International Conference on Advances in Steel Structures (ICASS 2025) and the 4th International Symposium on Industrialized Construction Technology (ISICT 2025)

"Cleat angle behaviour in C-shaped purlin-to-rafter connections: Experimental study and design considerations"

Proceedings of the 12th International Conference on Advances in Steel Structures (ICASS 2025) and the 4th International Symposium on Industrialized Construction Technology (ISICT 2025)

"A Comprehensive study on residual stress in cold formed steel press-braked channel sections"

Proceedings of the 12th International Conference on Advances in Steel Structures (ICASS 2025) and the 4th International Symposium on Industrialized Construction Technology (ISICT 2025)

"Cyclic Performance of Screw Fasteners in Cold-Formed Steel Stud-to Plywood Sheathing Connections"

Proceedings of the 12th International Conference on Advances in Steel Structures (ICASS 2025) and the 4th International Symposium on Industrialized Construction Technology (ISICT 2025)

"Behaviour of Cold-Formed Steel Built-up Open Sections Subjected to Interactive Buckling Modes"

Proceedings of the International Colloquium on Stability and Ductility of Steel Structures (SDSS 2025)

"Experimental investigation of the ultimate and service shear strength of the bolted clip-angle connector in a CFS beam-to-column connection"

Proceedings of the International Colloquium on Stability and Ductility of Steel Structures (SDSS 2025)

"Behaviour of Screw Fasteners in Cold-Formed Steel Stud-to-Sheathing Connections"

Proceedings of the International Colloquium on Stability and Ductility of Steel Structures (SDSS 2025)

"Behaviour of bolted apex connector in single-channel CFS portal frames- An experimental study”

Proceedings of the Annual Stability Conference Structural Stability Research Council

"Experimental study on Flexural Behaviour of Cold-Formed Steel Composite Panel System”

Proceedings of the 13th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2024)

"Behaviour of bolted apex connector in single-channel CFS portal frames- Experimental study”

Proceedings of the 13th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2024)

"Experimental investigation on bolted apex connector for single-channel CFS portal frames"

Proceedings of the 10th International Conference on Steel and Aluminium Structures (ICSAS 2024)

"Experimental investigation and design consideration on pull-through capacity of a C-shaped purlin section"

Proceedings of the 10th International Conference on Steel and Aluminium Structures (ICSAS 2024)

"Cold Metal Transfer Welding Technology on Cold-Formed Steel Structural Members: Feasibility And Applicability."

Proceedings of the 11th International Conference on Advances in Steel Structures (ICASS’23)

"The shear performance comparison of a welded and bolted cold-formed steel clip-angle in a beam-to-column shear connection"

Proceedings of the 9th International Conference on Thin-Walled Structures

Examining the Viability and Applicability of Cold Metal Transfer Welding Technology for Cold-Formed Steel Structural Members

Proceedings of the 9th International Conference on Thin-Walled Structures

Experimental Investigation on Cold-Formed Steel Built-Up Beam Splice Connection Using Flange Splice and Web Cleat

Proceedings of the 9th International Conference on Thin-Walled Structures

Assessment of DSM Design Standards for Cold-Formed Steel Built-Up Closed Cross-Section Columns - Future Directions

Proceedings of the 9th International Conference on Thin-Walled Structures

Proposal for Interactive Buckling Design of Cold-Formed Steel Built-Up Closed Cross-Section Columns

Proceedings of the 9th International Conference on Thin-Walled Structures

Structural behaviour of Cold‐Formed Steel back‐to‐back welded sections subjected to longitudinal shear

Proceedings of the 10th European Conference on Steel and Composite Structures (EUROSTEEL)

Experimental investigation of the service shear strength of the welded clip‐angle connector in a CFS beam‐to‐column connection

Proceedings of the 10th European Conference on Steel and Composite Structures (EUROSTEEL)

“Sheathing Braced Design of CFS Wall Panels: Review and Proposal”

Proceedings of the Cold-Formed Steel Research Consortium (CFSRC) Colloquium

“Sheathing Braced Design of CFS Studs using Direct Stiffness-Strength Method Design”

Proceedings of the Cold-Formed Steel Research Consortium (CFSRC) Colloquium

“Design of Cold-Formed Steel Built-Up I Section Columns subjected to Interactive Buckling”

Proceedings of the Cold-Formed Steel Research Consortium (CFSRC) Colloquium

“Design of Cold-Formed Steel Built-Up Closed Section Columns - Modified Local Slenderness Equation”

Proceedings of the Cold-Formed Steel Research Consortium (CFSRC) Colloquium

“Design Challenges for Cold-formed Steel Built-up columns with Local-global Interactive buckling”

Proceedings of the 9th European Conference on Steel and Composite Structures

“Strength-Stiffness based design method for Sheathed Cold-formed Steel Members”

Proceedings of the 9th European Conference on Steel and Composite Structures

“Cold-Formed Steel Built of Columns: Experimental Investigation”

Proceedings of the 12th Pacific Structural Steel Conference

“Cold-Formed Steel Wall Panels: Sheathing Braced Design Concepts for Flexural Loading”

Proceedings of the 9th International Conference on Steel and Aluminium Structures’ – ICSAS19

“New Design Method for the Structural Steel Beams Strengthened With Low Modulus CFRP”

Proceedings of the 9th International Conference on Steel and Aluminium Structures’ – ICSAS19

“Sheathing Restraints on CFS Structural Members – Experimental Investigation”

Proceedings of the 9th International Conference on Steel and Aluminium Structures’ – ICSAS19

"Design of steel beams strengthened using low-modulus carbon fiber reinforced polymers"

Proceedings of the Civil Engineering Conference in the Asian Region (CECAR 8)

"3/Three Dimensional Geometric Imperfection Measurements and Formulations on Cold-Formed Steel Sections”

Proceedings of the 11th Structural Engineering Convention - 2018

"Design of Sheathed Cold-Formed Steel Wall Panels”

Proceedings of the 11th Structural Engineering Convention - 2018

"Use of Low-Modulus CFRP For Structural Steel Members Strengthening”

Proceedings of the 11th Structural Engineering Convention - 2018

"Structural Behaviour of Cold-Formed Steel Built-Up Beams”

Proceedings of the 11th Structural Engineering Convention - 2018

"Sheathing Stiffness Determination For Cold-Formed Steel Wall Panels”

Proceedings of the 11th Structural Engineering Convention - 2018

"Innovative Retrofitting Method for Structural Steel Members Subjected to Flexure”

Proceedings of the 11th Structural Engineering Convention - 2018

"Effect of Eccentricity on Cold-Formed Steel Built of Columns”

Proceedings of the 11th Structural Engineering Convention - 2018

"Development of New Design Specifications for Steel Beams Strengthened with Low Modulus CFRP”

Proceedings of the 11th Structural Engineering Convention - 2018

"Influence of Perforations in Cold Formed Steel Built Up Beams – Experimental Investigation”

Proceedings of the 11th Structural Engineering Convention - 2018

“Cold-Formed Steel Built of columns: Experimental Investigation”

Proceedings of the ninth International Conference on Advances in Steel Structures (ICASS)

“Design approach for steel channels retrofitted with Cold formed steel”

Proceedings of the International Conference on Engineering Research and Practice for Steel Construction

“Design methods for metallic beams strengthened with low modulus carbon fiber reinforced polymers”

Proceedings of the International Conference on Engineering Research and Practice for Steel Construction

“Behavior of Cold-Formed Steel Built-Up Beams: Experimental Investigation”

Proceedings of the Eighth International Conference on Thin-Walled Structures (ICTWS)

“Effect of Gypsum Sheathings on Cold-Formed Steel Panels: Flexural Test Results”

Proceedings of the Eighth International Conference on Thin-Walled Structures (ICTWS)

“Retrofitting of open channel built-up beams using CFRP”

Proceedings of International Conference on Composite Materials and Structures

“Design of retrofitting steel channels using cold formed steel channels - Numerical study”

Proceedings of International Conference on Composite Materials and Structures

“Experimental Investigation on Bolted Sleeve Connection between Two CFS Channels”

Proceedings of International Conference on Composite Materials and Structures

“The flexural strength behavior of profiled steel sheet with hot rolled plate panel system with bolted connection”

Proceedings of International Conference on Composite Materials and Structures

Rotational behavior of cold formed steel beams connected through clip angles

Proceedings of the 8th European Conference on Steel and Composite Structures (EUROSTEEL)

Geometric imperfection measurements on cold‐formed steel channels: An approach using 3D non‐contact laser scanner

Proceedings of the 8th European Conference on Steel and Composite Structures (EUROSTEEL)

Behaviour of gypsum sheathed cold‐formed steel stud walls under lateral loadings

Proceedings of the 8th European Conference on Steel and Composite Structures (EUROSTEEL)

The flexural strength behavior of profiled steel sheet – with hot rolled plate panel system with bolted connection

Proceedings of the 8th European Conference on Steel and Composite Structures (EUROSTEEL)

Behaviour of CFS strengthened hot‐rolled structural steel beams under flexure

Proceedings of the 8th European Conference on Steel and Composite Structures (EUROSTEEL)

Improving the flexural stiffness and lateral torsional buckling behavior of the structural steel channel sections by CFRP strengthening

Proceedings of 7th International conference on steel and aluminum structures

“Numerical Studies on Halting Crack Growth Using Crack Stop Hole and Asymmetrically Bonded CFRP Patch”

Proceedings of the Eighth International Conference on Advances in Steel Structures

“A Numerical Study on Strengthening of Crack Stop Hole”

Proceedings of the Seventh International Conference on Thin-Walled Structures

“An Experimental Study on Flexural Strengthening of Structural Steel Angle Sections using Carbon Fiber-Reinforced Polymer Composites”

Proceedings of the Seventh International Conference on Thin-Walled Structures

“Study of Cold Formed Steel Partially Closed Built-Up Sections with Geometric Imperfection Combinations”

Proceedings of the Seventh International Conference on Thin-Walled Structures

“Flange Compactness Definition for Horizontally Curved I-Girders”

Proceedings of the Pacific Structural Steel Conference (PSSC 2013)

“Definition of Flange Compactness for I-Beams that are subjected to Combined Primary Bending and Torsion or Lateral Flexure”

2006 ASCE Structures Congress

“Elastic Buckling of Centerline-Stiffened Plates Subjected to a Linearly Varying Stress Distribution”

Proceedings of the Annual Stability Conference

“Lateral Stability of Braced Curved I-Girder Systems”

Proceedings of the Annual Stability Conference

“Elastic Buckling of Plates Subjected to Uniaxial Eccentric Compression”

Proceedings of the Fourth International Conference on Thin-Walled Structures

“Elastic Buckling of Centerline-Stiffened Plates Subjected to a Linearly Varying Stress Distribution.”

Proceedings of the Twenty-second Southeastern Conference on Theoretical and Applied Mechanics (SECTAM)

“Elastic Local Buckling of Curved I-girder Flanges”

Proceedings of Annual Stability Conference

“Behaviour of Web panels Curved in Plan,”

Proceedings of Structures Congress 2000

“Stability of Curved Bridges during Construction”

- Davidson JS, Abdalla RS, and Mahendrakumar Madhavan

report published by the University Transportation Center for Alabama (UTCA)

“Design and Construction of Modern Curved Bridges”

- Davidson JS, Abdalla RS, and Mahendrakumar Madhavan

report published by the University Transportation Center for Alabama (UTCA)